Chemkut 555CFHD is one of the “New Generation” of Chlorine Free Cutting Oils, developed to reduce the difficulty of disposing of wastes that are contaminated with chlorine compounds.
Chemkut 555CFHD is a product designed for very severe operations and is recommended for the machining of tough alloys. The oil may be also used for broaching and many other heavy duty operations.
Chemkut 500CFHD may be used on single spindle, as well as multi-spindle machines.
Chemkut 555CFHD is compounded with a high level of very efficient additives that contain active sulphur. The oil will stain copper and copper containing alloys, but these may be “bright dipped” to remove sulphur stains. The oil should not be used for machine lubrication if there are any copper lines or bronze bearings in the machine.
Typical Analysis
Appearance: Light Coloured, Oily Liquid
Odour: Mild, Oil
Viscosity 40 °C: 32 cSt
Viscosity Index: 90 Min.
Specific Gravity: 0.88
Pour Point °C: -20
Rust Protection ASTM D665: Pass
Flash Point °C (COC): 195
Total Additives: 31.5%
Copper Strip Corrosion ASTM D130: 4a